United States Army warfighters in theater are often faced with the challenge of broken, damaged, or missing parts necessary to maintain the safety and productivity required. Waste plastics can be utilized to improve the self-reliance of warfighters on forward operating bases by cutting costs and decreasing the demand for the frequent resupplying of parts by the supply chain. In addition, the use of waste materials in additive manufacturing in the private sector would reduce cost and increase sustainability, providing a high-value output for used plastics. Experimentation is conducted to turn waste plastics filament that can be used in fused filament fabrication. The effect of extrusion temperature and number of extrusion cycles on polymer viscosity and crystallinity are explored. The effect of blends and fillers to impart additional functionality are also examined. Tensile specimens were tested and compared to die-cut and injection molded parts. Parts printed from recycled polyethylene terephthalate had the highest tensile strength of all recycled plastics evaluated (35.1 ± 8 MPa), and were comparable to parts printed from commercial polycarbonate-ABS filament. Elongation to failure of all recycled plastics was similar to their injection molded counterpart. In addition, select military parts were printed with recycled filament and compared to original parts. This research demonstrates some of the first work on the feasibility of using recycled plastic in additive manufacturing.

3D printing feedstocks from recycled materials

256th National Meeting (2018)

The official archive and repository for all ACS Meetings & Expositions abstracts and select posters or presentations.