Gas turbines have been widely used. With the continuous improvement of the performance of gas turbines, the turbine inlet temperature has greatly exceeded the heat resistance limitof the turbine blade material, so advanced cooling technology is required.The film cooling effectiveness distribution over the blade under the effect of wake was obtained by Pressure Sensitive Paint (PSP) technique. The test blade has 5 rows of chevron film holes on the pressure side, 3 rows of cylindrical film holes on the leading edge and 3 rows of chevron film holes on the suction side.The mainstream Reynolds number is 130000 based on the blade chord length and the mainstream turbulence intensity is 2.7%. The upstream wake was simulated by the spoken-wheel type wake generator. The film cooling effectiveness was measured at three wake Strouhal numbers (0, 0.12 and 0.36) and three mass flux ratios (MFR1, MFR2 and MFR3).The results show that the increase of mass flux ratio leads a decrease of the film cooling effectiveness on the suction surface. In the wake condition, the effect of mass flux ratio is weakened. Wake leads a marked decrease of the film cooling effectiveness over most blade surface except for the surface near leading edge on the pressure surface. In the high mass flux ratio condition, the effect of wake on the film cooling effectiveness on the suction surface is weakened, and that on the pressure surface is strengthened.


Experimental Study on Film Cooling Effectiveness of Blade With Chevron Shaped Holes Under Wake Influence

Division / Sponsor:
International Gas Turbine Institute (IGTI)

Paper Proceedings: https://asmedigitalcollection.asme.org/GT/GT2020/volume/84058

Turbo Expo - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.