This study experimentally investigates wave propagation in nonlinear lattices, extracting amplitude-dependent band structures from direct measurements of travelling waves and observing amplitude-dependent plane wave stability. Such findings provide experimental validation of analytical predictions previously derived from a multiple scales perturbation technique. Both one-dimensional (1-D) and two-dimensional (2-D) monatomic shear lattices are explored. Heavy magnetic inclusions periodically spaced in a matrix of nylon wire form the discrete shear lattices, which are arranged in both 1-D (single column) and 2-D (multiple column) configurations. Such systems are subject to geometric stiffness nonlinearity primarily due to the non-constant tension that develops in the wires at sufficiently high amplitudes. In the experiments performed, an elastodynamic shaker excites plane waves in the system, while laser Doppler vibrometery is employed to measure the subsequent waveform at multiple points in the lattice. The experimental findings in this work demonstrate the viability of fabricating wave-based devices that exploit the amplitude-dependent filtering and stability characteristics of nonlinear plane waves. 

For band structure measurements, the shaker (B&K 4809) gradually introduces harmonic loading to the chain’s boundary. As the wave propagates, two single point laser Doppler vibrometers (Polytec PDV 100) record the velocity time histories at neighboring unit cells after the shaking mass. Time windowing the data to study a region free of reflections from the boundary provides two time-delayed velocity signals characteristic to travelling waves. Identifying the phase difference of the plane wave’s fundamental frequency component provides direct measurements of wavenumber that, when paired with the shaker’s sending frequency, yield the lattice’s band structure. A lifting of the passband occurs when re-measuring the band structure for successively higher plane wave amplitudes, confirming the nonlinear hardening behavior predicted by multiple scales. Plane wave stability is experimentally observed by using a high-stroke shaker (LDS V408) to launch wave packets into the lattices and collect velocity measurements at multiple locations via a scanning laser Doppler vibrometer (Polytec PSV 400). In the 1-D chain, time-windowed measurements of the wave packet arrivals at the unit cells confirm the amplitude-dependent stability of plane waves. Low amplitude wave packets retain their spectral content almost exclusively at the fundamental frequency and higher harmonics (integer multiples of the fundamental). By contrast, the instabilities that develop for high amplitude wave packets are characterized by nontrivial generation of broadband incommensurate frequency content. Stability exhibits its expected direction dependence in the 2-D lattice for symmetric (i.e. uniform) stiffness distributions. Wave propagation along the lattice direction is inherently less stable than inclined directions consistent with the multiple scales analysis.


Experimental Demonstration of Amplitude-Dependent Band Structure and Plane Wave Stability in Nonlinear Lattices

Division / Sponsors: 
Aerospace, Bioengineering, Applied Mechanics, Design Engineering Division, Advanced Energy Systems, Manufacturing Engineering Division, Noise Control and Acoustics, Nondestructive Evaluation, Diagnosis, and Prognosis (NDPD), Nuclear Engineering Division, Process Industries Division, Fluids Engineering, Heat Transfer, Materials, Microelectromechanical Systems, Safety Engineering and Risk Analysis, Computers & Information in Engineering


Paper Proceedings: https://asmedigitalcollection.asme.org/IMECE/IMECE2020/volume/84478

IMECE2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.