*Turbocharger surge remains an area of concern for the automotive industry as it limits the permissible operating range on the compressor map, while also adversely impacting the compressor’s pressure rise, efficiency, and acoustics. The present study uses Stereoscopic Particle Image Velocimetry (SPIV) to investigate the flow field at the inlet of an automotive turbocharger compressor without a recirculating channel. Experiments were carried out at four different speeds, including 80, 100, 120, and 140 krpm, which represent a substantial portion of the compressor map. The mass flow rates investigated ranged from choke to deep surge, thus spanning the entire mass flow regime at each rotational speed. The current work aims to characterize how the compressor inlet velocity field varies with rotational speed, with a specific emphasis on surge. The qualitative nature of the flow field (radial dependence of axial and tangential velocity profiles), over the choke to mild surge range, was observed to be nearly independent of rotational speed for comparable operating conditions (for example, comparison of mild surge at different rotational speeds). A quantitative comparison of the velocity profiles at the choke or mild surge operating points showed an increase in the velocity magnitudes with increasing rotational speed. The flow field at deep surge, however, was observed to change substantially from 80 krpm to 140 krpm. At 80 krpm, the character of the flow field at different times (at different points on the surge cycle) was observed to be similar: the core flow near the center of the duct was always directed into the impeller, whereas the reversed flow occupied an annular region near the periphery in nearly all time instances. However, as the rotational speed was increased to 140 krpm, the variation in the flow field at different instances within a deep surge cycle increased. At 140 krpm, the negative flow rate (where the cross-sectional average flow is directed out of the inducer back into the inlet duct) portion of the surge cycle  was still similar to the overall surge flow field at 80 krpm, but over a substantial part of the positive flow rate (cross-sectional average flow is directed into the impeller) portion of the surge cycle, there was no sign of reversed flow within the visualization domain. As the rotational speed was increased, the surge loop (obtained by combining the PIV and pressure transducer data) extended over a wider portion of the compressor map with higher maximum (positive) and minimum (negative) flow rates, along with higher amplitude pressure fluctuations.* *The mean amplitude of mass flow rate and pressure ratio fluctuations at deep surge increased in nearly a quadratic fashion with rotational speed. The deep surge frequency did not change substantially over the range of rotational speeds examined in this study.*


Particle Image Velocimetry As Applied to Inlet Flow Field of a Turbocharger Compressor at Varying Rotational Speeds With Emphasis on Surge

Division / Sponsors: 
Aerospace, Bioengineering, Applied Mechanics, Design Engineering Division, Advanced Energy Systems, Manufacturing Engineering Division, Noise Control and Acoustics, Nondestructive Evaluation, Diagnosis, and Prognosis (NDPD), Nuclear Engineering Division, Process Industries Division, Fluids Engineering, Heat Transfer, Materials, Microelectromechanical Systems, Safety Engineering and Risk Analysis, Computers & Information in Engineering


Paper Proceedings: https://asmedigitalcollection.asme.org/IMECE/IMECE2020/volume/84478

IMECE2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.