In advanced aerospace structures, including gas turbine engines, components are subjected to vibratory loading over many flight hours, making them vulnerable to high cycle fatigue. Thus, for a material to be safely used in these applications, it must first be characterized for its ability to withstand high cycle fatigue. To characterize these materials more quickly, vibration-based methods can quickly accumulate fatigue cycles by exciting a cantilevered plate specimen at one of its resonant modes until failure. For fatigue tests exceeding 1000 Hz, a resonant mode known as the “two-stripe” mode is often used, so named for its two node lines which extend from the clamped edge of the specimen to the opposite free edge. The two-stripe mode is especially desirable due to its existence at high frequencies and the presence of a large uniaxial bending stress along its free edge. In particular, the mode meets two key criteria: (1) the resonant frequency is sufficiently isolated from other neighboring modes such that they do not interfere with the mode shape, and (2) the ratio of stresses between the free edge of the plate and the clamped edge of plate is significantly greater than 1, such that fatigue failure occurs predictably in a place where it can be monitored by instruments.

Vibration-based fatigue testing with the two-stripe mode has predominantly been performed using square plate specimens, but in principle rectangular plates are equally valid. There has been little research done in determining how alternative dimensions impact the performance. Thousands of modal analysis simulations using ANSYS show that, while square plates meet the criteria, a rectangular plate having a length-to-width ratio of 1.37 inches may provide more favorable results. The purpose of this work is to validate the ANSYS simulations using a 1000 lb shaker from Data Physics Inc and a selection of plate dimensions from the modal analysis experiments. The plates are monitored with a laser vibrometer and subjected to sine sweeps to identify the frequencies of the two-stripe and other neighboring modes, thus validating the frequency isolation criteria. Select plates are further monitored by a pair of strain gauges to validate their stress ratios, thus validating the stress ratio criteria. Having validated the simulations, recommendations are given for how to quickly select preferable plate dimensions when planning a test around the operating frequencies of the test equipment. It is also found that the maximum strain in the plates appears to be a function only of plate thickness and the length-to-width ratio, not the overall size, which suggests that vibration-based fatigue testing can be extended to substantially higher frequencies when paired with a faster shaker.


Scaling Relationships of Vibration-Based Fatigue Testing

Division / Sponsors: 
Aerospace, Bioengineering, Applied Mechanics, Design Engineering Division, Advanced Energy Systems, Manufacturing Engineering Division, Noise Control and Acoustics, Nondestructive Evaluation, Diagnosis, and Prognosis (NDPD), Nuclear Engineering Division, Process Industries Division, Fluids Engineering, Heat Transfer, Materials, Microelectromechanical Systems, Safety Engineering and Risk Analysis, Computers & Information in Engineering


Paper Proceedings: https://asmedigitalcollection.asme.org/IMECE/IMECE2020/volume/84478

IMECE2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.