Direct formic acid fuel cells (DFAFCs) using palladium (Pd) as an anode catalyst exhibit high performance. However, the performance of DFAFC using Pd catalysts is rapidly reduced during operation. In this study, degradation and recovery in cell performance of DFAFCs are investigated. For DFAFC tests, Pd and Pt are used as anode and cathode catalysts, respectively, and are applied to Nafion membrane by catalyst-coated membrane (CCM) spraying. As multiple repeated DFAFC operations are performed, the cell performance of DFAFC is steadily degraded. This behavior is ascribed to the electrooxidation of Pd into Pd-OH, which occurs between 0.1-0.55 V. To investigate the dependency of the cell performance on the Pd-OH and to evaluate how the cell performance is regenerated, cyclic voltammetry (CV) tests are executed. In CV experiments where the voltages applied to the DFAFC single cell are lower than 0.7 vs. DHE, the cell performance where the voltage is higher than 0.9 V vs. DHE, cell performance is reactivated due to redox reactions of Pd-OH into Pd-O and Pd-O into Pd. ATR-FTIR and XPS are used to confirm the transformation of Pd.

Effect of palladium anode catalyst on performance of direct formic acid fuel cell

242nd National Meeting (2011)

The official archive and repository for all ACS Meetings & Expositions abstracts and select posters or presentations.