The Boiling Water Reactor (BWR) Mark I Containment Program was implemented by the Owner’s Group circa 1980 to mitigate the effects of small, intermediate and design bases (Loss of Coolant Accident, LOCA) pipe break accidents on the torus, supports, internal structures and attached piping.  One of the significant mitigation attributes implemented during the Mark I Program is normal operation with a drywell-to-wetwell differential pressure (dP) maintained by the plant Nitrogen Make-up System used to inert the Primary Containment (PC).  The differential pressure served to reduce the downcomer water leg in the vent system resulting in significantly reduced vent system thrust and pool swell loads.  The vent system is designed to transport the mixture of drywell atmosphere, steam, and water forced from the Drywell by the increasing drywell pressure post-accident, quenching it in the pool of water maintained in the suppression chamber (torus).

To sustain primary Containment dP requires frequent venting of the Torus or nitrogen make-up to the Drywell requiring Standby Gas System operation and cycling of PC vent and purge valves which places additional burden on the charcoal filters.  The venting also places burden on Control Room Operators to perform the required actions and maintain Technical Specification limits.

Elimination of the dP benefits plant operation by minimizing cycling of containment valves, reduction of burden on Control Room operators, reduction in Standby Gas System cycles extending charcoal filter life and a reduction of the nitrogen make-up.  Overall the Utility estimates that elimination of the dP will provide a cost savings of \$0.5 M per year.

 


Elimination of Bwr Mark I Program Primary Containment Drywell-to-Wetwell Differential Pressure

Division / Sponsors: 
Pressure Vessels & Piping (PVP)


Paper Proceedings: https://asmedigitalcollection.asme.org/PVP/PVP2020/volume/83815

PVP2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.