This paper deals with the motion of coupled cabinets containing electronics inside subjected to seismic input. In power plants, chemical plants, etc., several rectangular cabinets containing important electronics inside are always lined up in the control center. These electronics are necessary for the control of the entire plant. However, if these electronic device are damaged, the entire plant cannot be controlled, and a serious accident may occur. In many cases, these cabinets are put directly on the floor. Thus, it is thought that in the worst case, cabinets may turn over by rocking motion during earthquakes and electronics may be in danger of breaking. Moreover, even if it does not overturn, there is a concern that a large acceleration is applied to the internal electronics due to the seismic waves. Therefore, it is needed to develop methods that can reduce rocking motion and prevent electronics damage simultaneously.

First, we consider the single cabinet with electronics. The cabinet is modeled as a rotating rigid body around its corner. The internal electronics are modeled as a rigid body moving in the translational direction in the cabinet. Hereinafter we call this system as single system. We input a seismic wave to the single system and investigate the rocking angle of the cabinet and the acceleration of the electronics in the cabinet. 

After that, we consider the adjacent cabinets connected by an elasto-plastic damper containing electronics. The cabinets are modeled as rotating rigid bodies. The internal electronics are modeled as rigid bodies moving in the translational direction in the cabinets. Hereinafter we call the total system as a connected system. The elasto-plastic damper has bilinear hysteretic characteristics and can absorb the energy of earthquake inputs. Thus, we also input the same seismic wave to the connected system to obtain the rocking angle of cabinets and the acceleration of electronics in the connected system. In these simulations, it is assumed that cabinets do not collide with each other.   
Then, we investigate the effect of the parameters of the elasto-plastic damper suppressing the rocking angle of the cabinets and the acceleration of electronics. 

Finally, we compare the maximum rocking angle and the maximum acceleration of the single system with that of the connected system and consider the method to reduce the rocking angle and the acceleration simultaneously.   
 


Study on Vibration Mitigation of Connected Cabinets Storing Electronics Subjected to Seismic Input Using Elasto-Plastic Damper

Division / Sponsors: 
Pressure Vessels & Piping (PVP)


Paper Proceedings: https://asmedigitalcollection.asme.org/PVP/PVP2020/volume/83815

PVP2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.