The effect of environment on fatigue life is currently assessed using methods (e.g. NUREG/CR-6909), which may be excessively conservative when applied to plant components and loading transients. To reduce this conservatism, the ASME WG-EFEM has proposed the development of an improved assessment methodology for environmental fatigue based on a Total Life Prediction approach that would be adequately, but not excessively, conservative. Such an approach necessitates the development of analytical methods for the various stages of crack nucleation, short crack growth and long crack growth. Hence, there is a requirement to undertake testing within the short crack growth regime which would bridge the gap between fatigue nucleation and long crack growth (Paris Law) to better enable prediction of total life measured by fatigue endurance.

A test methodology has been developed to enable short crack growth testing with in-situ monitoring using DCPD. Testing has been undertaken in both high temperature air (300ºC) and simulated end-of-cycle primary water chemistry at 300ºC on cold-worked stainless steel specimens, which were subject to a range of load ratios and rise times. FEA modelling has been undertaken to determine the effective stress intensity factors applied under the loading conditions based on the specific material properties.

This paper presents the results from this testing programme, and provides fatigue crack growth data for short cracks between 0.15 mm to 1.0 mm. Crack growth rates have been compared to those predicted in ASME, Code Case N-809 and results from material specific in-house testing to assist the understanding of the behaviour of mechanically short cracks.


Results From Environmentally-Assisted Short Crack Fatigue Testing on Austenitic Stainless Steels

Division / Sponsors: 
Pressure Vessels & Piping (PVP)


Paper Proceedings: https://asmedigitalcollection.asme.org/PVP/PVP2020/volume/83815

PVP2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.