This paper aims to validate the effectiveness of the widely used Relap5 code in simulating two-phase natural circulation, and its capability to predict flashing-induced instabilities. The RELAP5 code is validated against experimental data from the NMR test facility, which was designed to investigate the flow instability for a BWR-type novel modular reactor (NMR).The simulations by RELAP5/MOD3.4 code had been performed under various conditions by changing system pressure, core inlet subcooling, core inlet flow resistance, and core heat power etc. The flow stability for a certain operating condition could be determined from the time trace profile of the loop natural circulation flow rate. The results showed that the simulated mass flow rate increases with increasing core inlet temperature, reproducing the experimental trend. And the maximum error between the experimental data and the calculated results is within 10%. The predicted natural circulation dimensionless numbers, the phase change number and inlet subcooling number, also had a good agreement with the experimental data.  In general, the RELAP5 code is able to simulate flashing-induced instability and density wave oscillations, occurred in the natural circulation test facility at low pressures. However, flashing tends to be suppressed at a higher pressure (400kPa). And the enlargement of core inlet resistance coefficient can also have a positive impact on natural circulation system stability.


Validation of RELAP5/MOD3.4 for Flashing-Induced Instabilities in a Natural Circulation Loop

Division / Sponsors: 
Power Division & Nuclear Engineering Division (NED)

Power Conference
Paper Proceedings: https://asmedigitalcollection.asme.org/POWER/POWER2020/volume/83747

International Conference on Nuclear Engineering
Paper Proceedings: https://asmedigitalcollection.asme.org/ICONE/ICONE2020/volume/83761

POWER-ICONE - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.