Rod bundle geometry keeping a compact structure&nbsp;is widely utilized in the nuclear reactor core to remove the heat efficiently. The complex&nbsp;rod bundle geometry poses many challenges in knowing and modeling the heat transfer and flow under&nbsp;two-phase flow conditions. It is of&nbsp;importance&nbsp;to make local measurements,&nbsp;establish flow parameter&nbsp;database&nbsp;and understand&nbsp;flow characteristics&nbsp;of the two-phase flows&nbsp;in the rod bundle geometry, which&nbsp;will be the base to&nbsp;model&nbsp;the flows&nbsp;and further to improve the reactor performance and safety.&nbsp;In the past studies, the two-phase flows in the rod bundle channels were&nbsp;mainly measured&nbsp;by using differential pressure cells&nbsp;and Gamma-/X-ray densitometries&nbsp;for the local volume-averaged,&nbsp;area-averaged&nbsp;and line-averaged void fractions. However, the local measurements&nbsp;of double- and four-sensor probe&nbsp;measuring technique,&nbsp;which can obtain not only the local void fraction&nbsp;but also the other local important parameters such as interfacial area concentration (IAC), bubble diameter and interfacial velocity, are necessary&nbsp;for understanding the flows in the rod bundle geometry.&nbsp;In the present paper, the four-sensor optical probe has been used to perform local measurements at 16 measuring points in the octant triangular measuring region of a&nbsp;cross-section in a 6×6 rod bundle flow channel under 16 flow conditions. The local parameters&nbsp;of&nbsp;void fraction, IAC, bubble diameter and bubble velocity&nbsp;vector&nbsp;were obtained&nbsp;in the bubbly flows and a corresponding&nbsp;database was established&nbsp;for the&nbsp;rod bundle&nbsp;flow channel. The measured local void fraction and IAC&nbsp;show their&nbsp;radial distributions&nbsp;with&nbsp;both core-peaking and wall-peaking shapes&nbsp;closely linked&nbsp;with the superficial velocity of two phases. By increasing the superficial liquid velocity or decreasing the superficial gas velocity, the distribution shapes&nbsp;tend&nbsp;to change from the core-peaking to the wall-peaking. The measured local bubble diameters increase with the decrease of superficial liquid velocity and the increase of superficial gas velocity. The bubbles move along the rod bundle flow channel with their velocity component in the main flow direction showing a typical radial core-peaking profile and their velocity components in the cross-section showing a significant movement from the central region to the channel box wall region especially under high superficial liquid velocities.&nbsp;The cross-sectional area-averaged values of the local parameters were obtained by adopting a measuring-point-based graphical integration.&nbsp;The resultant&nbsp;area-averaged void fraction&nbsp;and IAC&nbsp;have been&nbsp;used to&nbsp;evaluate and analyze&nbsp;two drift-flux model&nbsp;correlations and three IAC correlations respectively&nbsp;in this paper. &nbsp; Keywords: Rod bundle flow&nbsp;channel; Four-sensor probe; Void fraction; Interfacial area concentration; Bubble diameter; 3D bubble velocity


ICONE Competition - ICONE28-POWER2020-16740: Flow Characteristics of Upward Two-Phase Flows in a Rod Bundle Geometry

Division / Sponsors: 
Power Division & Nuclear Engineering Division (NED)

Power Conference
Paper Proceedings: https://asmedigitalcollection.asme.org/POWER/POWER2020/volume/83747

International Conference on Nuclear Engineering
Paper Proceedings: https://asmedigitalcollection.asme.org/ICONE/ICONE2020/volume/83761

POWER-ICONE - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.