The dispersion characteristics of airborne pathogens were investigated in a Boeing 767 mockup cabin containing 11 rows with 7 seats per row, using two tracer gas source methods: continuous injection and a coughing manikin.  Both the injection source and the coughing manikin were located on the same seat in the sixth row. The injection source utilized  CO~2~ gas at an injection rate of 5.0 liters per minute mixed with Helium at a rate of 3.07 liters per minute to neutralize buoyancy. The manikin coughed approximately once every 75 seconds, with a volume of 4.2 liters of CO~2~ per cough. To ensure sufficient data were collected at each sampling location, each coughing manikin test was run for 5 coughs and each injection source test for 30 minutes of continuous injection. In both test methods, the tracer gas concentration was measured using CO~2~ gas analyzers at seated passenger breathing level and radially up to 3.35 m away from the gas injection location, representing four rows of a standard B767 aircraft. The collected data obtained from each tracer method was then normalized to provide a suitable comparison basis that is independent of tracer gas introduction flowrate. The results showed that both tracer source methods gave similar dispersion trends in diagonal and lateral directions away from the injection location. However, the tracer gas concentration was higher along the longitudinal direction in the coughing manikin tests due to the cough momentum. The results of this work will help researchers analyze different experimental and numerical approaches used to determine contaminant dispersion in various environments will and provide a better understanding of the associated transport phenomena.

 

*This research was funded by the National Institute for Occupational Safety and Health (NIOSH), Centers for Disease Control and Prevention (CDC). The findings and conclusions in this publication are those of the authors and do not necessarily represent  the official position of NIOSH.*

 


Comparison of Pathogens Dispersion in an Aircraft Cabin Using Gas Injection Source Versus a Coughing Manikin

Division / Sponsors: 
Heat Transfer Division (HTD), Fluids Engineering Division (FED)

Heat Transfer Summer Conference
Paper Proceedings: https://asmedigitalcollection.asme.org/HT/HT2020/volume/83709

18th International Conference on Nanochannels, Microchannels, and Minichannels
Paper Proceedings: https://asmedigitalcollection.asme.org/ICNMM/ICNMM2020/volume/83693

Fluids Engineering Division Summer Meeting
Paper Proceedings: https://asmedigitalcollection.asme.org/FEDSM/FEDSM2020/volume/83716

HT-ICNMM2020 - Virtual Conference, SHTC - Virtual Conference, FEDSM2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.