A new diffuser design is developed for a low specific speed, multistage pump. In this design the diffuser and the de-swirl vanes are integrated into one vane. This creates diffuser channels that extends from behind the impeller exit through the cross-over, towards the eye of the next stage impeller. Experiments show the occurrence of a saddle type instability in the head curve. At a critical flow rate of close to 50% of the flow rate at Best Efficiency Point (BEP), the head drops by 7% of the head at BEP. In this study Computational Fluid Dynamics (CFD) are used in an effort to understand the underlying flow phenomena.

The head curve that is obtained with the transient CFD simulations contains a saddle type instability at a flow rate that is approximately the same as in the experiments, but with a lower magnitude. At flow rates higher than the critical flow rate, the predicted head and power are in very good agreement with the experimental data. At flow rates lower than the critical flow rate, the head and power are slightly over-predicted. An analysis of the pressure distribution in the pump reveals that the head loss in the diffuser shows a discontinuity at the critical flow rate, while both the impeller head and the head loss in the vaneless gap increase continuously for decreasing flow rate. It indicates that the cause of the head instability is in the diffuser. Moreover, a strong increase in the variability of head and power at flow rates below the critical flow suggests that the phenomenon is unsteady.

Flow patterns in the impeller and in the diffuser, as calculated by CFD, show a high degree of periodicity and are very similar for flow rates down to the critical flow rate. However, for lower flow rates the flow pattern changes completely. A rotating stall pattern is observed that consists of two or three stalled diffuser channels with a significantly lower flow rate or even a reversed flow. This stall pattern propagates from one channel to the next channel with a frequency of approximately 30% of the impeller rotation frequency.

 


Part Load Instability and Rotating Stall in a Multistage Low Specific Speed Pump

Division / Sponsors: 
Heat Transfer Division (HTD), Fluids Engineering Division (FED)

Heat Transfer Summer Conference
Paper Proceedings: https://asmedigitalcollection.asme.org/HT/HT2020/volume/83709

18th International Conference on Nanochannels, Microchannels, and Minichannels
Paper Proceedings: https://asmedigitalcollection.asme.org/ICNMM/ICNMM2020/volume/83693

Fluids Engineering Division Summer Meeting
Paper Proceedings: https://asmedigitalcollection.asme.org/FEDSM/FEDSM2020/volume/83716

HT-ICNMM2020 - Virtual Conference, SHTC - Virtual Conference, FEDSM2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.