The objective of this study is to validate a high-fidelity finite element tire model on hard pavement. In this model, the tire rubber matrix is modeled using locking-free natural-modes lumped brick elements with embedded thin beam elements along the tire’s circumference, meridian, and diagonals for modeling the tire’s reinforcements (belt, ply and bead). The internal air pressure is applied as a distributed force on the inner surface of the brick elements. Frictional contact between the outer surface of the brick elements and the pavement is modeled using the penalty method in the normal contact direction along with an asperity based Coulomb friction model. In order to validate the tire model, a medium duty truck tire is modeled and the following response quantities are compared to experimental results: (1) normal load versus deflection at different tire pressures; (2) rolling resistance versus speed; (3) longitudinal force versus slip; (4) lateral force versus slip angle for different normal loads; and (5) self-aligning torque versus slip angle for different normal loads.


Validation of a High-Fidelity Finite Element Tire Model on Pavement

Division / Sponsors: 
Design Engineering Division and Computers & Information In Engineering Division


Paper Proceedings: https://asmedigitalcollection.asme.org/IDETC-CIE/IDETC-CIE2020/volume/83907

IDETC2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.