Recently, the demand of carbon fiber reinforced plastics (CFRP) has been rapidly increased in the various fields. In most cases, CFRP products requires a finish machining like cutting or grinding. In the case of an end-milling, burrs and uncut fibers are easy to occur. On the other hand, a precise machined surface and edge will be able to obtain by using the grinding tool. Therefore, this research has been developed a novel cBN electroplated end-mill that combined end-mill and grinding tool. In this report, the effectiveness of developed tool was investigated. First, the developed tool cut the CFRP with side milling. As the result, the cBN abrasives that were fixed on the outer surface of developed tool did not drop out. Next, the end-milled surface of CFRP was ground with the developed tool under several grinding condition based on the Design of Experiments. Consequently, the optimum grinding condition that can obtain the sharp edge which does not have burr and uncut fiber was found. However, the surface roughness was not good enough. Thus, an oscillating grinding was applied. In addition, the theoretical surface roughness formula in case using the developed tool was formularized. As the result, the required surface roughness in the airplane field was obtained.


Development of Cbn Electroplated End-Mill for High Precision Machining of Cfrp

Division / Sponsor: 
Manufacturing Engineering Division (MED)

International Manufacturing Science and Engineering Conference - Paper Proceedings: https://asmedigitalcollection.asme.org/MSEC/MSEC2020/volume/84256

JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing - Paper Proceedings: https://asmedigitalcollection.asme.org/lemp/LEMP2020/volume/83624

MSEC2020 - Virtual Conference, LEMP2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.