Validating simulation results of vibrating turbine blades relies usually on measurements of realistic  
or academic specimens on special test rigs. In real operation the blades are excited mainly by  
aerodynamic forces. Stator blade vanes introduce wakes and vortices that excite the rotor blade  
rows. The circumferential spectrum of the aerodynamic forces contains many engine orders which  
are multiples of the engine speed. Each engine order forces the bladed disk to vibrate approximately  
in a certain nodal diameter mode shape. Additionally to the circumferential spectrum there may also  
exist non-synchronous excitation mechanisms. Particularly during run-up or run-down the flow  
through the turbine is instationary. Altogether the excitation forces during operation are highly  
complex and difficult to quantify. Therefore, for measurements of blade vibration on special test  
rigs, the excitation should be well known to be able to reproduce the excitation spectrum applied in  
simulations. It is desirable to use excitation spectra that consists of only a few engine order  
excitations. Especially for nonlinear systems unwanted excitation orders can possibly lead to  
nonlinear effects which may interfere with the measurement. An easy way to achieve this is the use  
of a number of permanent magnets that pull the blades each time they pass over a magnet. The main  
engine order can be controlled by varying the number of magnets. This concept has the drawback  
that besides the main engine order also other engine orders get excited as the magnets introduce  
force pulses in the structure. The use of discrete electromagnets is also common. It offers a more  
flexible operation as besides the number of magnets, the coil current can also be varied. The  
disadvantage of force pulses still persists. At the Institute of Dynamics and Vibration Research in  
Hannover an innovative excitation device was developed and patented to overcome the  
aforementioned problems, which is analyzed in this paper. It resembles a toroidal horseshoe  
electromagnet. The excitation force spectrum is controlled by a variable air gap over the  
circumference between device and blade. As the air gap can be manufactured arbitrarily, any desired  
engine order excitation can be realized. Additionally, by varying the devices coil current frequency  
sweeps can be performed. In this paper an extensive study of the excitation force spectrum of the  
device is conducted. Therefore, theoretical investigations of the expectable spectrum are given  
under simultaneous variation of air gap geometry and excitation current. These predictions are then  
validated by experiments on a rotation test rig that features a small, academic bladed disk. The  
magnetic excitation and vibrations of the blades are measured. The device promises to create well  
predictable and controllable excitation force spectra which will improve the validation strategy in  
particular non-linear simulation tools for the vibrations of turbine blades.


Single Nodal Diameter Excitation of Turbine Blades: Experimental and Theoretical Study

Division / Sponsor:
International Gas Turbine Institute (IGTI)

Paper Proceedings: https://asmedigitalcollection.asme.org/GT/GT2020/volume/84058

Turbo Expo - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.