High aspect ratio channels are a common internal cooling feature in Gas Turbine blades, mostly suitable for the trailing edge region. Traditionally such channels are fitted with rib-turbulators or pin-fin turbulators to augment heat transfer and prevent material failure.  Highly efficient internal cooling of blades can improve the efficiency of a real Gas Turbine power cycle by tolerating higher Turbine Inlet Temperatures (TIT). Topology optimization (TO) has been employed in the current study to find optimized shape of these ducts, with an aim to increase heat transfer, while constraining the pressure drop across the channel. This method, commonly used in structural problems, is a novel topic of research when applied to fluid-thermal studies. Material distribution in the computational domain is varied by changing porosity value in each cell and thereby altering the fluid path and creating a conjugate heat transfer problem. Each cell has a value of Brinkmann porosity factor which either simulates a blockage, or a fluid region depending on a low or high value of this design variable. Hence the degree of freedom is high in this method, and there is no manual bias introduced, unlike in parametric shape optimization which is limited to a few design parameters. The unconventional geometries obtained as an end product of this optimization process can thus be an alternative to existing rib/pin-fin type of cooling geometries. The recent progress in additive manufacturing can now facilitate the manufacturing of complicated shapes. An in-house Open-FOAM solver has been used to carry out the process in only twice the amount of time compared to a regular RANS-CFD. 3-Dimensional rectangular channels with inlet aspect ratios of 4:1 and 8:1 have been considered as baselines with a constant inlet velocity. 


Topology Optimization of High Aspect Ratio Internal Cooling Channels As a Design for Additive Manufacturing

Division / Sponsor:
International Gas Turbine Institute (IGTI)

Paper Proceedings: https://asmedigitalcollection.asme.org/GT/GT2020/volume/84058

Turbo Expo - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.