Hydrogen micromix combustion is a promising concept to reduce the environmental impact of both aero and land-based gas turbines by delivering carbon-free and ultra-low-NOx combustion without the risk of autoignition or flashback. The ENABLEH2 project aims to demonstrate the feasibility of such a switch to hydrogen for civil aviation, within which the micromix combustion, as a key enabling technology, will be matured to TRL3. The micromix combustor comprises thousands of small diffusion flames where air and fuel are mixed in a cross-flow pattern. This technology is based on the idea of minimizing the scale of mixing to maximize mixing intensity. The high-reactivity and wide flammability limits of hydrogen in a micromix combustor can produce short and low-temperature small diffusion flames in lean overall equivalence ratios.

For hydrogen-air mixtures, there is a need to further characterise the physical importance and calibration process of the laminar Schmidt (Sc), Lewis (Le) and Prandtl (Pr) and turbulent Schmidt (Sc) numbers. In addition, there is limited numerical and experimental data about flame characteristics and emissions of hydrogen micromix combustor at high pressure and temperature conditions.

In this paper, the CFD software STAR-CCM+ was used with the FGM (Kinetic Rate) combustion model to simulate and calibrate hydrogen micromix flames. The research was divided into two parts. In the first part, the values of laminar Schmidt, Lewis and Prandtl numbers for H2 and air, non-reactive, flow mixtures were estimated as 0.25, 0.3 and 0.75 from correlations obtained in the literature. The typical Borghi diagram has been modified to reflect this type of diffusion flame, since the assumption of Sc = Le = Pr = 1 and are only for premixed flames. This diagram characterizes flame regime based on Damköhler (Da), Karlovitz (Ka) and turbulent Reynolds (Ret) numbers that were calculated from preliminary CFD simulations.

In the second part, the value of laminar Schmidt number was set as constant while laminar Lewis and Prandtl numbers were obtained from the flamelet tables. A Turbulent Schmidt number was then obtained by comparing RANS and LES simulations of a single injector. If Sct>0.2, the predicted NOx production of RANS simulations approaches that of LES; while Sct\<0.2 provides similar overall flame structure between RANS and LES. It is concluded that, for the current simulations, Sct=0.2 is a good compromise between flame structure and emissions prediction. Flame characteristics and NOx emissions predicted by Thickened Flame and FGM Kinetic Rate models in a single injector geometry were also compared.


Characterising Hydrogen Micromix Flames: Combustion Model Calibration and Evaluation

Division / Sponsor:
International Gas Turbine Institute (IGTI)

Paper Proceedings: https://asmedigitalcollection.asme.org/GT/GT2020/volume/84058

Turbo Expo - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.