Effective and efficient crack management programs for liquids pipelines require consistent, high quality non-destructive examination (NDE) to allow validation of crack in-line inspection (ILI) results.  Enbridge leveraged multiple NDE techniques on a 26-inch flash-welded pipe as part of a crack management program.  This line is challenging to inspect given the presence of irregular geometry of the weld.  In addition, the majority of the flaws are located on the internal surface, so buffing to obtain accurate measurements in the ditch is not possible. As such, to ensure a robust validation of crack ILI performance on the line, phased array ultrasonic inspection (PAUT), time-of-flight diffraction (TOFD), and a full matrix capture technology were all used as part of the validation dig program. 

All methods were used on most of the flaws characterized as part of the dig program providing a relatively large data set for further analysis.  Encoded scans on the flash welded long seam weld were collected in the ditch and additional analyses were performed off-site to identify and size the flaws.  Buff-sizing where possible and coupon cutouts were selected and completed to assist with providing an additional source of truth.  Secondary review of results by an NDE specialist improved the quality of the results and identified locations for repeat scans due to data quality concerns.  Physical defect examinations completed after destructive testing of sample coupon cutouts were utilized to generate a correlation between the actual defect size from fracture surface observation and the field measurements using various NDE methods.

This paper will review the findings from the program, including quality-related learnings implemented into standard NDE procedures as well as comparisons of detection and sizing from each methodology.  Finally, a summary of the benefits and limitations of each technique based on the experience from a challenging inspection program will be summarized.


Comparison of Non-Destructive Examination Techniques for Crack Inspection

Division / Sponsors: 
Pipeline Systems Division

Paper Proceedings: https://asmedigitalcollection.asme.org/IPC/IPC2020/volume/84447

IPC2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.