*The interaction of multiple injections in a diesel engine facilitates a complex interplay between freshly introduced fuel, previous combustion products, and overall combustion. To improve understanding of the relevant processes, high-speed Planar Laser-Induced Fluorescence (PLIF) with 355-nm excitation of formaldehyde and Polycyclic Aromatic Hydrocarbon (PAH) soot precursors is applied to multiple injections of n-dodecane from Engine Combustion Network Spray D, characterized by a converging 189-*µ*m nozzle.  High-speed schlieren imaging is applied simultaneously with 50-kHz PLIF excitation to visualize the spray structures, jet penetration, and ignition processes. For the first injection, formaldehyde (as an indicator of low-temperature chemistry) is first found in the jet periphery, after which it quickly propagates through the center of the jet, towards the jet head prior to high-temperature ignition. At second-stage ignition, downstream formaldehyde is consumed rapidly and upstream formaldehyde develops into a quasi-steady structure for as long as the momentum flux from the injector continues. Since the first injection in this work is relatively short, differences to a single long injection are readily observed, ultimately resulting in high-temperature combustion and PAH structures appearing farther upstream after the end of injection. For the second injection in this work, the first formaldehyde signal is significantly advanced because of the entrained high-temperature combustion products, and an obvious premixed burn event does not occur. The propensity for combustion recession after the end of the first injection changes significantly with ambient temperature, thereby affecting the level of interaction between the first- and second injection.*


Simultaneous High-Speed Formaldehyde PLIF and Schlieren Imaging of Multiple Injections From an ECN Spray D Injector

Division / Sponsors: 
Internal Combustion Engine Division (ICED)

Paper Proceedings: https://asmedigitalcollection.asme.org/ICEF/ICEF2020/volume/84034

ICEF2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.