*A study of the effect of extended Hounsfield Unit range and voxel size on defect detection in friction stir welds*

Ahmad M. Baydoun, American University of Beirut, Mechanical Engineering Department, P.O. Box 11-0236, Riad El-Solh, Beirut 1107 2020, Lebanon, Email: amb52@mail.aub.edu  

Ramsey F. Hamade, American University of Beirut, Mechanical Engineering Department, P.O. Box 11-0236, Riad El-Solh, Beirut 1107 2020, Lebanon, Email: rh13@aub.edu.lb

 

Friction stir welding (FSW) is a novel welding method that is garnering attention, in part, due to its ability to join dissimilar materials. One of the challenges in producing dissimilar friction welded joints is achieving proper material mixing in the weld zone and, thus, achieving good joint strength. Another challenge is producing welds that are free of internal defects. One way to ensure proper mixing and defect-free welds is achieved by inspecting the joints via nondestructive testing (NDT) methods that insures that the sample is kept intact. The non-destructive detection of these defects has been an active research area in recent years. Various methods, including the utilization of ultrasonic waves, gamma rays, X-rays, and X-ray CT, have been implemented to this end.This study explores the effects of two critical parameters of X-ray CT scanning namely 1) voxel size and 2) Hounsfield unit (HU) range (12 bit and 16 bit depth) on the detection of internal defects in lap welded dissimilar AA1050 AA6061-T6. Small voxel size (higher resolution) improves the ability of detecting internal defects and improves the effectiveness of the thresholding process. Higher HU range results in a wider separation between detected material peaks, thus enhancing the effectiveness of the thresholding process as well.

 

Dissimilar AA1050/AA6061-T6 welds are produced in a lap weld configuration. The samples are scanned via X-ray CT at two different voxel sizes (2.457 E-02 and 1.420 E-03 mm^3^) and two HU ranges 12 bit and 16 bit depth (2\^^12^ and 2\^^16^). The generated Digital Imaging and Communications in Medicine (DICOM) images are segmented based on proper HU thresholding found via the Otsu thresholding method. The effect of voxel size on the thresholding method is determined by analyzing scans made at the two resolution levels for the 16 bit HU range. The impact of the HU range on the effectiveness of the thresholding method is investigated by analyzing scans performed at 12 bit and 16 bit depth for the same voxel size. Finally, the combined effect of both parameters is explored.

 


A Study of the Effect of Extended Hounsfield Unit Range and Voxel Size on Defect Detection in Friction Stir Welds

Division / Sponsors: 
Aerospace, Bioengineering, Applied Mechanics, Design Engineering Division, Advanced Energy Systems, Manufacturing Engineering Division, Noise Control and Acoustics, Nondestructive Evaluation, Diagnosis, and Prognosis (NDPD), Nuclear Engineering Division, Process Industries Division, Fluids Engineering, Heat Transfer, Materials, Microelectromechanical Systems, Safety Engineering and Risk Analysis, Computers & Information in Engineering


Paper Proceedings: https://asmedigitalcollection.asme.org/IMECE/IMECE2020/volume/84478

IMECE2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.