To gain high cost effective products along with quality and productivity, Pulsed Gas Metal Arc Welding (P-GMAW) process is used in many highly developed industries for fabrication of welded joints. The input parameters are the most important factors which affects the productivity, quality and cost effective for the welding process.  The processes enable low net heat input, stable spray transfer and with low mean current. To enhance efficiencies with constant voltage GMAW process, P-GMAW is an outstanding substitute for those industries which are looking to improve quality of welds since the process helps over varying operator’s skills*.* It is essential to determine the input/output relationship parameters, in order to recognize and control the P-GMAW welding process. P-GMAW applies waveform control logic to fabricate a very precise control of the arc during speed range and a broad wire feed. The power source switches between low background current and a high peak current between 30 to 400 times per second to obtain modified spray transfer process. The peak current pinches off wire droplets and drive it to the welded joints over this period. The process produces low heat input allowing weld pool to solidify, that metal transfer cannot occur but by the mean time, background current maintains the arc with stable spray transfer. Trials have been conducted on SS 304 material using copper coated filler wire of size 1.4 mm based on the Taguchi’s L~27~ standard orthogonal array. Current, Gas Flow Rate (GFR) and Wire Feed Rate (WFR) with a constant speed are the input parameters considered to carry out trials. The output parameters are Yield strength (YS, N/mm^2^), percentage of elongation and Ultimate Tensile Strength (UTS, N/mm^2^). Indirect response parameters are Viz., AE signals such as welding AE~RMS~, welding AE~ENERGY~, tensile AE~RMS~ and tensile AE~ENERGY~ along with MV signals like area and height of the weld bead are considered to assess the performance of the weld bead joint. It is clearly observed from the obtained results that an excellent relationship exists between welding AE~RMS~ welding AE~ENERGY~ with tensile AE~RMS~ and tensile AE~ENERGY~ along with MV signals which were taken at the time of tensile test to evaluate the performance of the weld bead joint. Verification of the results are carried out through performing different NDT testing methods on weld bead joint Viz., X – radiography, Scanning Electron Microscope (SEM) images to analyse external defects in the welded joints. On different zones of welded joint, Energy dispersive analysis (EDX) examination is carried out for elemental composition.


Assessment of Weld Bead Performance for Pulsed Gas Metal Arc Welding (P-GMAW) Using Acoustic Emission (AE) and Machine Vision (MV) Signals Through NDT Methods for SS 304 Material

Division / Sponsors: 
Aerospace, Bioengineering, Applied Mechanics, Design Engineering Division, Advanced Energy Systems, Manufacturing Engineering Division, Noise Control and Acoustics, Nondestructive Evaluation, Diagnosis, and Prognosis (NDPD), Nuclear Engineering Division, Process Industries Division, Fluids Engineering, Heat Transfer, Materials, Microelectromechanical Systems, Safety Engineering and Risk Analysis, Computers & Information in Engineering


Paper Proceedings: https://asmedigitalcollection.asme.org/IMECE/IMECE2020/volume/84478

IMECE2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.