Subsea wet gas compressors have been successfully in operation for approximately 5 years. Their use has proven to  
increase the recovery by approximately 10% and achieve a reliability up to 98%. Further developed and operation of subsea  
wet gas compression requires detailed knowledge of compressor operability and how shift in operational conditions affect the  
compressor system. The compressors ability to handle wet gas is documented in detail for a gas volume fraction limited down  
to 0.90. The 4-5 last year of operation proves the wet gas concepts capability. As years pass by, well pressure and  
production rate declines which causes the compressor operation point to shift towards the high head and low flow (surge) area of the characteristics. In addition, compressor inlet transients increase due to pipe surge (slugs), requiring a robust control system to prevent instabilities, e.g. compressor surge. It is therefore vital to understand how the compressor inlet flow  
device behaves at different wet operation conditions. Accurate and reliable wet gas flow measurements are therefore crucial for establishing safe compressor operation.

Multiphase meters are used for wet gas flow metering to provide information about the total flow and liquid content. Most of these meters incorporate a venturi meter along with other sensors. Venturi tubes are the most considered the  suited single-phase meter for wet gas flow measurements. The reasons for this are their physical robustness to withstand erosion and the impact of liquid slugs at high velocities, their familiarity of use and the availability of standards for dry-gas conditions

The article documents how a standard dry gas venturi tube behave at different wet gas operation conditions. The venturi is  
designed according to ISO5167-4 for dry gas conditions and is tested at the low-pressure air water compressor test rig at  
NTNU. The objective of the current work is to document how wet gas affects the measurements and flow regime in a horizontally mounted venturi meter. Furthermore, it was of interest to connect the visible changes in flow regime to flow and pressure measurements and compare the wet gas overreading to previous work. To document overreading and flow regime  
variation, a new transparent venturi tube was installed at the compressor inlet. The transparency of the venturi makes it  
possible to visualize the flow mechanics though the venturi tube at different wet gas conditions. The venturi tube is tested in a GMF range from 1 to 0.83 at an air volume flow rate of 1.3m3/s.


Experimental Analysis of Venturi-Tube Behavior in Wet Gas Conditions

Division / Sponsors: 
Aerospace, Bioengineering, Applied Mechanics, Design Engineering Division, Advanced Energy Systems, Manufacturing Engineering Division, Noise Control and Acoustics, Nondestructive Evaluation, Diagnosis, and Prognosis (NDPD), Nuclear Engineering Division, Process Industries Division, Fluids Engineering, Heat Transfer, Materials, Microelectromechanical Systems, Safety Engineering and Risk Analysis, Computers & Information in Engineering


Paper Proceedings: https://asmedigitalcollection.asme.org/IMECE/IMECE2020/volume/84478

IMECE2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.