Conventional construction is a labor intensive, hazardous, expensive, inefficient, and wasteful process. According to the EPA, 534 million tons of construction debris were generated in the United States in 2014, which is more than twice the amount of generated municipal solid waste. In addition, conventional construction materials are often used inefficiently and with poor quality control, resulting in buildings with poor thermal performance. Infrastructure-scale additive manufacturing (AM) that is both scalable and portable has the potential to revolutionize the construction industry by enabling automation and expanding the design space for new installations.

The emergence of large-scale AM systems was partially enabled by commodity-grade feedstocks, such as polymer pellets or metal wire. However, infrastructure-scale AM components will weigh hundreds of thousands of pounds, making these materials are far too costly to be considered in infrastructure applications. However, concrete is the most cost-effective feedstock; it only costs pennies per pound.

While many concrete additive systems have been developed, they are typically gantry- or robotic-arm-based. This poses challenges for on-site, large-scale manufacturing. For the majority of the systems presented to date, significant site preparation would be required. Furthermore, to achieve the required build envelopes, the system must be larger than the structure being fabricated. This necessarily leads to gantry systems or robotic platforms that are prohibitively large, expensive to transport, set up, and operate, and difficult to position with the precision necessary.

In this paper, a portable and easily deployable cable-driven large-scale concrete AM system is presented. The system utilizes four base stations, which are deployed independently and connected to the deposition head with a series of cables. By precisely controlling the cable lengths, the deposition head can be repeatably positioned to within 0.3 cm over a large workspace. An integrated laser measurement system is used to track the deposition head. The laser measurements are used by a feedback control system to enable precise positioning.

To demonstrate this system, a wall has been developed to be printed at the Federal Energy Management Program (FEMP) conference in August 2020. The exterior of the wall, shaped to maximize heat transfer, is printed to act as form work and serve as a mounting surface for an energy-storage system. Two-inch-thick iso-foam is used to insulate the internal concrete from the exterior, providing a large internal mass for energy storage. Embedded water lines serve to cool the internal concrete, storing energy during off-peak periods. A hydronic system is used to, in effect, ‘turn off’ the insulation, allowing energy to be transferred from the interior to the exterior surface, reducing the peak demand on a building’s HVAC system. Three of the proposed walls will be installed in commercial buildings for field validation.


Construction-Scale Concrete Additive Manufacturing and its Application in Infrastructure Energy Storage

Division / Sponsors: 
Aerospace, Bioengineering, Applied Mechanics, Design Engineering Division, Advanced Energy Systems, Manufacturing Engineering Division, Noise Control and Acoustics, Nondestructive Evaluation, Diagnosis, and Prognosis (NDPD), Nuclear Engineering Division, Process Industries Division, Fluids Engineering, Heat Transfer, Materials, Microelectromechanical Systems, Safety Engineering and Risk Analysis, Computers & Information in Engineering


Paper Proceedings: https://asmedigitalcollection.asme.org/IMECE/IMECE2020/volume/84478

IMECE2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.