The Taylor cone jet is a well-known electrohydrodynamic flow (EHD), usually produced by applying an external electric field to a capillary liquid. The generation of this kind of flow involves a multi-phase and a multi-physics process and is stability has a specific window of working. The working windows is intrinsically dependent of the flow rate and the magnitude of the electric voltage applied. In case high voltages are applied to the jet it can atomize and produce an electrospray. Our work presents a numerical study of the process of atomization of a Taylor cone jet using computational fluid dynamics (CFD). The study intents to assess the limit conditions of operation and the applied voltage needed to stabilize an electrospray. The numerical model was implemented within OpenFOAM, where the multi-phase hydrodynamics equations are solved using a volume-of-fluid (VOF) approach. This method is coupled with the Maxwell equations governing an electrostatic field, in order to incorporate the electric body forces into the incompressible Navier-Stokes equations. The leaky-dielectric model is used and, therefore, the interface between the two phases is subject to the hydrodynamic surface tension and electric stress (Maxwell stress). This allows the leakage of charge though the phase due to ohmic conduction. Thus, the permittivity and conductivity of the phases are taken into consideration. A two-fluid system with relevant electric properties can be categorized as, dielectric-dielectric, dielectric-conducting and conducting-conducting considering the electrical conductivity and permittivities of the participating phases. Due to the usage of the leaky-dielectric model its possible to simulate any of this possibility. An increase on the applied voltage reaches a value where the cone instability is verified, allowing a discussion on this effect. It is demonstrated that, in order to adequately model the process of atomization fine grid refinement is needed. The validation of the numerical model is made by comparing against diverse experimental data, for a stable jet case. The diameter and velocity of the droplet and the electric current of the jet are the main variables that are compared with previously published results. The tests were performed with Ethylene Glycol. The cone and the jet are strongly affected by the flow rate. The dimensionless diameter, as a function of the dimensionless flow rate, agrees with the scaling laws. The model predicts accurate results over a wide range of flow rates. The results are obtained using structured meshes, with different refinement levels, in order to guarantee grid independence.


Numerical Analysis on the Stability Conditions of an Electrohydrodynamic Jet

Division / Sponsors: 
Aerospace, Bioengineering, Applied Mechanics, Design Engineering Division, Advanced Energy Systems, Manufacturing Engineering Division, Noise Control and Acoustics, Nondestructive Evaluation, Diagnosis, and Prognosis (NDPD), Nuclear Engineering Division, Process Industries Division, Fluids Engineering, Heat Transfer, Materials, Microelectromechanical Systems, Safety Engineering and Risk Analysis, Computers & Information in Engineering


Paper Proceedings: https://asmedigitalcollection.asme.org/IMECE/IMECE2020/volume/84478

IMECE2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.