This study is a comparison of finite element-based methodologies used for predicting final part distortion and residual elastic strains of IN625 parts produced via selective laser melting (SLM) additive manufacturing (AM). It has been well documented that parts produced via SLM undergo temperature gradients in the vertical build direction during fabrication. This thermal gradation can impact final part quality and microstructure in terms of final part distortion and mechanical properties as a result of built-up residual stresses due to a varying thermal history. It has also been determined in the literature that these residual stresses and thermal histories are tied to SLM process parameters such as laser power and scan speed. However, there is no quantified process-property relationship between process parameters and final part attributes such as distortion and microstructure published to date.

The focus of this work is to contrast the reliability, accuracy, and effectiveness of final part distortion and residual elastic strain predictions for IN625 parts produced with SLM by NetFabb 2020, Abaqus 2019, and a sequentially coupled thermomechanical simulation utilizing an IN625 elastic-plastic user subroutine with the Abaqus 2019 solver. With the lack of a process-property relationships and the need to avoid empirically determining an optimized set of process parameters for each material and part geometry, it is advantageous to develop computational thermomechanical models to predict final part distortion and other part attributes with respect to input process parameters. To this end, computational software packages such as NetFabb and Abaqus have started to include thermomechanical modeling tools to help engineers account for distortions and residual stresses in their designs and calibrate process parameters for refinement.

To maintain similarities between each finite-element methodology, the machine process parameters used for the heat source model, the material of IN625, and the geometry were held constant and in accordance with the 2018 National Institute of Standards and Technology (NIST) AM benchmark test results. The SLM machine selected was an EOS M270 and the specimen geometry used was a 75 mm long, 12 mm tall, and 5 mm wide part to correspond with the 2018 NIST AM benchmark’s commercial build machine and geometry, respectively. The accuracy and reliability of each finite-element methodology was determined by measuring the deviation between the simulated results of each modeling approach with the 2018 NIST AM benchmark test measurements for final part distortion and residual elastic strain. Lastly, the effectiveness of each methodology was determined by contrasting the computational time needed for each method.

 

 

 


Comparison of Finite-Element Methodologies Used for Predicting Final Part Distortion and Residual Elastic Strains in Selective Laser Melting Additively Manufactured Parts

Division / Sponsors: 
Aerospace, Bioengineering, Applied Mechanics, Design Engineering Division, Advanced Energy Systems, Manufacturing Engineering Division, Noise Control and Acoustics, Nondestructive Evaluation, Diagnosis, and Prognosis (NDPD), Nuclear Engineering Division, Process Industries Division, Fluids Engineering, Heat Transfer, Materials, Microelectromechanical Systems, Safety Engineering and Risk Analysis, Computers & Information in Engineering


Paper Proceedings: https://asmedigitalcollection.asme.org/IMECE/IMECE2020/volume/84478

IMECE2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.