Roman Roxas, Erika Osbourne, Dylon Johnson, Josh Wolbert, Adam Harnish, Dieu Nguyen, Camrie Stewart, Linda Vahala and Zhili Hao

Department of Mechanical and Aerospace Engineering, Old Dominion University, Norfolk, VA, USA

This paper presents a theoretical study of the sensor-artery interaction in an arterial pulse signal measurement using a tactile sensor. The sensor-artery interaction is first analyzed for pulse signal transmission into the sensor, from the perspective of elastic wave propagation, and then is examined for relating all the involved parameters to estimated arterial indices, for the purpose of providing guidance on sensor design optimization for improving measurement accuracy and a better interpretation of a measured pulse signal taking into account artery sites and individual variations.    

To assess arterial health, arterial pulse signals are noninvasively measured at the skin surface by a tactile sensor and are then utilized to estimate various arterial indices, which are indicative of arterial wall parameters (e.g., elasticity, viscosity and radius). Therefore, acquiring a pulse signal with minimum distortion holds the key for measurement accuracy in arterial indices. A measured pulse signal results from the sensor-artery interaction in a pulse signal measurement. To date, many experimental studies have established the importance of hold-down pressure exerted on a sensor in acquiring a pulse signal with maximum amplitude. Yet, very few theoretical studies exist on the effect of all the parameters involved in sensor-artery interaction on a measured pulse signal and consequently estimated arterial indices.

Acting as an excitation source, a pulse signal in an artery initiates an elastic wave propagating in the overlying tissue above the artery and is completely reflected back into the tissue, if no sensor is placed above the artery. To noninvasively measure a pulse signal in an artery, a tactile sensor is placed at the skin surface above the artery. By exerting hold-down pressure on the sensor, the pulse signal is transmitted into the sensor at the skin surface. Meanwhile, motion artifacts (e.g., respirations and body shift of a person) also play a role in how the pulse signal is transmitted into the sensor. As such, a measured pulse signal results from the sensor-artery interaction: a combination of the true pulse signal in an artery, the arterial wall, overlying tissue at the artery and the sensor, under the influence of hold-down pressure and motion artifacts. From the perspective of elastic wave propagation, the sensor-artery interaction is first analyzed for the effect of all the involved parameters on pulse signal transmission into the sensor. Afterwards, from the perspective of lumped-element modeling, the sensor-artery interaction is analyzed for the effect of all the involved parameters on estimated arterial indices. The developed theoretical theories on the sensor-artery interaction are further qualitatively validated by some experimental data and the related experimental findings in the literature. The full paper will present the details about the theoretical study of the sensor-artery interaction.


A Theoretical Study of Sensor-Artery Interaction in Noninvasive Arterial Pulse Signal Measurement Using Tactile Sensors

Division / Sponsors: 
Aerospace, Bioengineering, Applied Mechanics, Design Engineering Division, Advanced Energy Systems, Manufacturing Engineering Division, Noise Control and Acoustics, Nondestructive Evaluation, Diagnosis, and Prognosis (NDPD), Nuclear Engineering Division, Process Industries Division, Fluids Engineering, Heat Transfer, Materials, Microelectromechanical Systems, Safety Engineering and Risk Analysis, Computers & Information in Engineering


Paper Proceedings: https://asmedigitalcollection.asme.org/IMECE/IMECE2020/volume/84478

IMECE2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.