As micro/nanotechnologies advance and become more pervasive in common consumer products, robust and efficient modeling techniques for near-field thermal radiation are needed.  While analytical approaches based on fluctuational electrodynamics have been used to describe near-field radiative heat transfer between simple, highly-symmetric geometries (e.g., spheres, layered media), these approaches are not generalizable to the complex, three-dimensional structures seen in practical real-world design.  In response to this limitation, various numerical approaches have been developed to solve the relevant stochastic Maxwell equations.  One such approach is the thermal discrete dipole approximation (TDDA) (S. Edalatpour et al., *Phys. Rev. E*. 91, 063307, 2015).  While better convergence toward exact analytical solutions using the TDDA approach has been generally observed with finer discretization, the computational demands for such large discretization schemes cannot be satisfied with a standard desktop computer.  This hinderance stems from the formulation’s required inversion of a large 3*N*-by-3*N* matrix, where *N* is the number of discretized subvolumes in the system.  The goal of the work presented here is therefore to reformulate the TDDA to be compatible with iterative approaches for solving large systems of linear equations and thereby avoid direct calculation of the matrix inverse.  Iterative approaches, such as the quasi-minimal residual method, the biconjugate gradient stabilized method, and the generalized minimal residual method, have already been integrated into similar light-scattering algorithms (M. A. Yurkin and A. G. Hoekstra, *J. Quant. Spectrosc. Radiat. Transf.* 106, 558, 2007), and so reformulating the TDDA in this way lends itself to cross-reference of iterative procedures commonly used within the light-scattering community.  Construction of the TDDA to avoid direct matrix inversion is achieved by deriving a system of linear equations in terms of an unknown deterministic system Green’s function which contains all information of the environment (i.e., both thermal and scattering effects).  Previously, the TDDA was based on the free-space Green’s function solution, and scattering effects were accounted for in the source function of the defining wave equation.  Knowledge of the system Green’s function allows calculation of quantities of interest such as the radiative flux, thermal conductance, and energy density.  This work applies the system Green’s function approach to the study of near-field radiative heat transfer in new geometries that more closely resemble the asymmetric and distorted shapes found in manufactured structures.  This technique, which lends itself to desktop computation rather than supercomputing facilities, makes application-driven design, experimental validation, and troubleshooting of near-field thermal radiation effects more accessible.


Deterministic Formulation of the Thermal Discrete Dipole Approximation for Computational Modeling of Near-Field Thermal Radiation in Arbitrary Geometries

Division / Sponsors: 
Aerospace, Bioengineering, Applied Mechanics, Design Engineering Division, Advanced Energy Systems, Manufacturing Engineering Division, Noise Control and Acoustics, Nondestructive Evaluation, Diagnosis, and Prognosis (NDPD), Nuclear Engineering Division, Process Industries Division, Fluids Engineering, Heat Transfer, Materials, Microelectromechanical Systems, Safety Engineering and Risk Analysis, Computers & Information in Engineering


Paper Proceedings: https://asmedigitalcollection.asme.org/IMECE/IMECE2020/volume/84478

IMECE2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.