Hexagonal boron nitride (h-BN) nanoparticles are of high interest in nanocomposites due to their outstanding mechanical and thermal stability, however due to its chemical inertness/stability, h-BN is not capable of forming favorable interfacial interactions with a polymer matrix, which consequently affects dispersion quality of h-BN nanoparticles. Non-covalent surface modification has shown promise in both improving dispersion quality of h-BN nanoparticles, and improving the interfacial properties between h-BN nanoparticles and the polymer matrix. Polydopamine (PDA), an adhesive protein, was used to non-covalently modify the surface of h-BN nanoparticles to create nanocomposites with improved interfacial interactions and dispersion quality. Both pristine h-BN nanoparticles (PBN) and h-BN nanoparticles modified by PDA (SBN) were incorporated into a polyethylene oxide (PEO) matrix towards bio-friendly polymer nanocomposites.

PDA modification improved SBN-PEO interactions. Enhanced interfacial interactions in PEO/SBN nanocomposites provided a significant increase in G’ and G” than that of PEO/PBN nanocomposites, with strong concentration dependence. This increase was noticeable even at the lowest SBN loading level (0.5 wt%). The enhanced interfacial interactions seemed to have great impacts on the roles of hydrodynamic reinforcement effects of BNs in PEO melt. Relaxation behaviors revealed that PBN nanoparticles produced faster relaxation and better elastic energy storage capability, likely due to the hydrodynamic reinforcement effects and plasticizing effects of PBN. Yet, stronger interactions as a result of PDA modification restricted the mobility of PEO chains in PEO/SBN nanocomposites, and seemingly overpowered the hydrodynamic reinforcement effects.

Dielectric testing revealed very different behaviors between nanocomposites made with PBN nanoparticles (PEO/PBN) and SBN nanoparticles (PEO/SBN), respectively. Dielectric constants (ε’) of PEO/PBN nanocomposites at all PBN concentrations varied only slightly from that of pure PEO, contrary to PEO/SBN nanocomposites, which produced an SBN concentration-dependent ε’. PEO/0.5wt%SBN nanocomposite obtained an improved ε’ from that of pure PEO, implying that the PEO-BN interfacial interactions were improved as a result of surface modification via PDA, and those improved interactions likely contributed positively to interfacial polarization. As SBN concentration increased, ε’ decreased, with PEO/20wt%SBN nanocomposite producing the lowest ε’. In comparison, PEO/20wt%SBN nanocomposite produced a much lower dielectric constant than PEO/20wt%PBN nanocomposite, indicating that at high SBN loading levels, the improved PEO-SBN interaction restricted dielectric polarization. This possible restriction is believed to be related to the suppressed α-relaxation behavior of PEO. While PEO/PBN nanocomposites again showed only slight variation in α-relaxation, PEO/SBN nanocomposites showed slower α-relaxation as SBN concentration increased, with the slowest α-relaxation observed in PEO/20wt%SBN nanocomposite.


Rheological and Dielectric Analysis of Polydopamine-Modified Boron Nitride/Polyethylene Oxide Nanocomposites

Division / Sponsors: 
Aerospace, Bioengineering, Applied Mechanics, Design Engineering Division, Advanced Energy Systems, Manufacturing Engineering Division, Noise Control and Acoustics, Nondestructive Evaluation, Diagnosis, and Prognosis (NDPD), Nuclear Engineering Division, Process Industries Division, Fluids Engineering, Heat Transfer, Materials, Microelectromechanical Systems, Safety Engineering and Risk Analysis, Computers & Information in Engineering


Paper Proceedings: https://asmedigitalcollection.asme.org/IMECE/IMECE2020/volume/84478

IMECE2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.