The steam sterilisation of reusable medical instruments is a critical process. Standardized treatments with hot, saturated steam at typical maximum temperatures of up to 134 °C often represent a significant thermal load, which is repeated with varying number of cycles depending on the medical device. Until now, there is no possibility for medical device manufacturers to monitor how often a product has been sterilized. However, this is necessary for both safety and warranty issues, since according to the Medical Devices Regulation, the manufacturer must specify how often a product can be sterilized.

In the paper a MEMS “sterilization cycle counter” is presented. It is designed to autonomously record, count and store steam sterilizations directly on the instrument by combining silicon micromechanics with shape memory actuators (SMA). That enables an autonomous operation without additional energy sources such as batteries. During the steam sterilisation cycle a certain temperature limit is exceeded once and detected by the SMA. The system development aims at the heterogeneous integration of standard SMA wires into a silicon microstructure. The transformation temperatures of the SMA is thereby increased to the relevant range by mechanical prestressing.

In detail, the paper first describes the approach of the counting mechanism and the possibilities and limitations of implementing and pretensioning of SMA wires in silicon microstructures. Based on that the development of the SMA actuator geometry using an SMA FEA Model based on the approach of Aurichio is described. The model is validated using an up-scaled test bench of the system, in which various geometric parameters can be varied. Subsequently, the approach is experimentally verified by means of an up-scaled functional model of the system. Finally, the results will be discussed in particular regarding the MEMS process chain to be carried out in the next step.


Development of a Shape Memory Alloy Actuator for a Micromechanical Sterilization Cycle Counter

Division / Sponsors: 
Aerospace Division

Paper Proceedings: https://asmedigitalcollection.asme.org/SMASIS/SMASIS2020/volume/84027

SMASIS2020 - Virtual Conference

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.