Santa Clara Valley Transportation Authority (VTA) required their original overhead contact system (OCS) along North 1st Street between Interstate Highway I-880 and West San Carlos Street at the Guadalupe River (opened in 1987) to be rehabilitated. HNTB was chosen to assist with the project and the first task included an overall inspection of the line to ascertain condition, operational deficiencies, and safety concerns. From this inspection, VTA prepared a scope of work for HNTB to perform and then prepare design documents for contractor bidding. During the inspection process, VTA further requested an evaluation of pole deflection in their Guadalupe Yard. Of interest is the line from Younger Street to the Guadalupe River at West San Carlos Street being joint pantograph and trolley pole compatible as VTA operates heritage streetcars during their Christmas holiday season.The inspection of the OCS revealed deficiencies and safety concerns due to the age and type of equipment in use, most of it being original. Trolley frogs, crossover pans, and section insulators had field constructed gliders that were non-standard or inconsistent between assemblies. Trolley wires were suspended by clamps with no insulation requiring span wire insulators which made the span wire between the insulators alive at 750 volts. An open faced disconnect switch was too close to an apartment balcony with the possibility of the live parts being touched by people on the balcony, and some OCS poles were too short to raise span wires for adjustment.&nbsp; During inspection, a trolley wire broke at a trolley frog anchor tip and fell to the street at the pedestrian mall in downtown San Jose. VTA engineering staff needed a means to prevent wire breaks from impacting public safety and directed HNTB to design a system of wire constraint using Kevlar synthetic rope to prevent wires from falling.This paper describes the deficiencies and safety concerns discovered during inspection and how they were eliminated through creative OCS design. It further describes the process of inspection, direction, design, and operation of the rehabilitation project and how the use of Kevlar synthetic rope was used to keep trolley wire from falling during wire breaks both in theory and actuality. It also describes the issues encountered during construction, stagger issues from joint operation, pole extension implementation, and general improvements made to the OCS.

Ocs Rehabilitation and Kevlar Contact Wire Fall Prevention-Vta San Jose, Ca

Paper Proceedings: https://asmedigitalcollection.asme.org/JRC/JRC2021/volume/84775

2021 Joint Rail Conference (JRC2021)

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.