The study involves applying the inverse dynamics technique to calculate the 3-dimensional (3D) reaction forces and moments at the lower limbs namely: ankle, knee, and hip joints. The study is specific to performing the Lebanese folkloric dance known as the “Dabke jump”. The aim is to compare the impact forces generated at the three joints. Also envisioned is to contrast the forces generated for a male (63 Kg) and a female (50.4 kg) dancer. For the female participant, the study also compares the force results obtained when she was barefoot and while wearing 8.5 cm high heels. The experimental part of the study consists of measuring the position data of the right lower limb of the participant when performing the jump. All at once, the reaction forces generated at the impact are synchronously measured. The position data are obtained using the OptiTrack™ motion capture system. The ground reaction forces are measured using the AMTI force plate (BP400600-OP-2K-STT). Using kinematics analysis in conjunction with inverse dynamics analysis, the filtered and fitted experimental data are then imported into MATLAB® to obtain a table containing all the internal forces and moments at each joint (ankle, knee, and hip joints) as function of time. Next, the results are plotted and compared. Force and moment data are analyzed using SPSS 22 (from IBM).&nbsp;&nbsp;The boxplot technique is used to identify the presence of outliers. Using both Mann-Whitney and Krustkal Wallis tests, all joint reaction forces and moments in three dimensions are analyzed. This is performed at different time intervals in order to instantaneously identify the prominent effect on each joint It is found that the largest impact force is generated at the ankle joint for both subjects. For the male participant, the impact maximum vertical force measured at the ankle is about 2.2 of body weight (BW). For the female participant, a maximum vertical force of 1.84 BW is recorded both barefoot and with heals. The forces and moments obtained for the male individual are larger than those obtained for the female individual. Moreover, for the female participant the vertical forces obtained for all joints when wearing an 8.5 cm high heel are found to be lower than those obtained when she is barefoot. This is most notably recorded at the hip joint where a maximum decrease of 21.2% decrease is observed. This finding suggests that when a dancer performs the “Dabke jump”, wearing an appropriate heel of suitable height will decrease the vertical impact forces on the lower limb joints and, therefore, may decrease the risk of injuries.

Lower Limb Joint Reaction Forces and Moments Calculations for a ‘Dabke Jump’: Application of 3D Inverse Dynamics Technique

Paper Proceedings: https://asmedigitalcollection.asme.org/IMECE/IMECE2021/volume/85543

ASME 2021 International Mechanical Engineering Congress and Exposition (IMECE2021)

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.