<p>A team of mechanical engineering students at Western Kentucky University designed a&nbsp;subsonic&nbsp;wind tunnel data acquisition system&nbsp;through LabVIEW&nbsp;to&nbsp;analyze&nbsp;the forces acting on an&nbsp;object in&nbsp;external air flow. The&nbsp;experimental setup&nbsp;provides&nbsp;future fluid mechanics laboratory students a hands-on procedure to study&nbsp;aerodynamic forces such as lift and drag.&nbsp;The physical models&nbsp;tested&nbsp;include&nbsp;3D-printed&nbsp;cylinders&nbsp;and&nbsp;NACA 0012&nbsp;airfoils&nbsp;of various sizes&nbsp;placed in the wind tunnel test section.&nbsp;The cylinder shape was chosen, because it provides a simple flow field that can easily be used to verify the accuracy of the system, and the NACA 0012 was selected for the simplicity of symmetric airfoil theory calculations. Pressure transducers were used to measure&nbsp;pitot tube velocity readings&nbsp;as well as&nbsp;the pressure at 16 points around the upper 180 degrees of the objects.&nbsp;The resulting pressure&nbsp;distribution&nbsp;on the surface of the bodies&nbsp;was then&nbsp;applied&nbsp;to calculate lift and drag forces acting on the objects.&nbsp;A force balance was also designed to securely mount objects in the wind tunnel while directly measuring the total lift&nbsp;and drag forces, calculating the moment about the leading edge,&nbsp;and monitoring the angle of attack. The force balance results can be used to verify the experimental results from the pressure distribution data.&nbsp;A LabVIEW&nbsp;code&nbsp;was written to communicate&nbsp;directly&nbsp;with&nbsp;data acquisition&nbsp;hardware&nbsp;(NI&nbsp;CompactDAQ), set experimental parameters such as air flow speed and sample rate, record data,&nbsp;and interpret the results through a single user interface.&nbsp;Inviscid theory was used to theoretically predict the&nbsp;ideal&nbsp;drag acting on the cylinder, and symmetric thin airfoil theory was used to predict the&nbsp;ideal&nbsp;lift acting on the airfoil. Along with theoretical&nbsp;models,&nbsp;CFD analysis was performed&nbsp;to simulate a controlled experiment and&nbsp;validate the experimental results.&nbsp;Though experimental data has not yet been collected,&nbsp;the LabVIEW&nbsp;code&nbsp;has been tested using simulated data, and the accuracy of the pressure transducers has been confirmed by comparing pressure readings to controlled manometer readings. The system is expected to provide accurate data limited to the maximum speed of the subsonic wind tunnel currently owned by the&nbsp;Thermofluids&nbsp;Laboratory&nbsp;at Western Kentucky University.&nbsp;Future improvements of this project could include purchasing a&nbsp;more&nbsp;capable wind tunnel to run experiments in the turbulent flow regime, as well as a larger test section to avoid error from wall effects. This experimental set up has laid the groundwork for a multitude of future studies. It can be used to observe aerodynamic forces acting on more complex NACA airfoil shapes, rotating plates, cylinders and spheres, wind turbine blades, ground vehicles, airplanes and more.</p>

Wind Tunnel Data Acquisition System

Paper Proceedings: https://asmedigitalcollection.asme.org/IMECE/IMECE2021/volume/85543

ASME 2021 International Mechanical Engineering Congress and Exposition (IMECE2021)

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.