The reproduction factor of Th232 is high in the thermal energy range and there is a possibility to achieve the breeding in LWRs. However, it is necessary to improve the conversion ratio since the breeding is difficult in LWRs. The conversion ratio can be improved by suppressing capture rate of Pa233 and by promoting capture rate of Th232. In addition, these capture rates can be modified by adding neutron absorber. Therefore, the neutron absorber is focused for improving the conversion ratio in this study.The high resonance peaks of Pa233 capture cross section exist around 1~100 eV. The resonance peaks of Th232 are higher than 10 eV. Thus, when the 1~10 eV neutrons are suppressed in the fuel, the Pa233 resonance capture reaction is suppressed and the Th232 resonance capture reaction is promoted by neutron spectrum hardening. Therefore, six neutron absorbers that have high capture cross section peaks at 1~10 eV were selected. The PWR pin cell calculations were carried out by Monte Carlo code MVP. The fuels are composed of a base material and an absorber. The base material is an oxidized fuel composed of U233(10 wt%), Th232(89.95 wt%), and Pa233(0.05 wt%). The amount of neutron absorber was adjusted so that the infinite multiplication factor becomes 1.3.The impact of adding neutron absorber on the reaction rate was evaluated. As the result, the hardening of the neutron spectrum leads increase of the capture rate of Pa233, and the capture rate of Th232 in the epithermal energy range is increased. The change of capture rate of Th232 is greater than that of Pa232. Therefore, the conversion ratio is found to be improved by adding neutron absorber.

Improvement of Conversion Ratio of Thorium Fuel in LWR by Adding Neutron Absorber

Paper Proceedings: https://asmedigitalcollection.asme.org/ICONE/ICONE28/volume/85246

2021 28th International Conference on Nuclear Engineering (ICONE28)

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.