<p dir="ltr">Fuel cell is an electrochemical device that converts fuel into electricity. Polymer electrolyte membrane fuel cells (PEMFCs) have been used for ground transportation due to its high efficiency and zero carbon emission. When it comes to unmanned aerial vehicles (UAVs), PEMFCs can support much longer flight endurance than internal combustion engines and batteries do. However, a lightweight PEMFC stack is required in order to carry enough payload for UAVs. In this research, a lightweight fuel cell stack was developed and fabricated based on the Horizon fuel cell stack. The stack components, including end plates, bipolar plates, and interconnects were redesigned and fabricated to replace those heavy components. Additive manufacturing (3D printing) and electroplating were used to fabricate bipolar plates and interconnects, whereas the end plates were machined from Garolite XX plates. The fabricated lightweight PEMFC stacks were tested using an Scribner 850e Fuel Cell Test System.&nbsp; The lightweight stack assembled with six electroplated bipolar plates showed that the maximum power density estimated was 3.514 W/cm² with 4.5 V and 1.6 A/cm² conditions for 100 ml/min of H2.&nbsp; The same fuel cell stack tested at 200 ml/min and 300 ml/min showed higher maximum power densities than 100 ml/min. The presentation includes design and fabrication, performance characterization, weight reduction strategy, and future work.&nbsp;</p>

Lightweight Pem Fuel Cell Stack for Unmanned Aerial Vehicle

Paper Proceedings: https://asmedigitalcollection.asme.org/HT/HT2021/volume/84874

ASME 2021 Heat Transfer Summer Conference (SHTC2021)

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.