<p>Dry gas lubricated non-contacting mechanical seals (DGS) are acknowledged as the sophisticated shaft end sealing solution which is most commonly found in turbo-compressors. Especially under demanding conditions where high speed is combined with high pressure, DGS becomes the preferred choice over other sealing alternatives. A reliable operation of DGS, due to the non-contact running between its rotating and stationary rings, is secured by the gas film in the region of a few microns in width. This paper presents the measurement method of obtaining the thickness of the running gap in two radial positions, namely the inner and outer diameter of the sealing gap, by integrating the proximity sensors in the stationary ring. The experimental investigations concerning film thicknesses, pressure distributions in the gas film and axial vibrations are carried out in an industry DGS up to 50 bar and 10,000 rpm, whereby a good insight into the dynamic behaviour of the sealing gap is provided. The results demonstrate the practicability of obtaining the gas film parameters in a grooved gas seal, bridging the gap between theory and practice. In combination with the experimental work presented in this paper, the numerical model for simulating the seal performance programmed in MATLAB is compared and validated. The comparisons for various operating conditions and groove profiles are discussed with the focus lying on the change of the hydrodynamic effect in the gas film.</p>

Experimental Studies on Dry Gas Seals With Time-Resolved Film Thickness Measurements

Paper Proceedings: https://asmedigitalcollection.asme.org/GT/GT2021/volume/84898

Turbo Expo 2021

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.