Pumping efficiency and rotordynamic stability are paramount to subsea multiphase pump operation since, during the life of a well, the process fluid transitions from a pure liquid to a mixture of gas in liquid to just gas. Circumferentially grooved seals commonly serve as balance pistons in pumps while also restricting secondary flow. Prior experimental results obtained with a grooved seal operating with a mixture of air and mineral oil show the seal rotordynamic force coefficients vary significantly with the gas volume fraction (GVF). This paper, complementing an exhaustive experimental program, presents a computational fluid dynamics (CFD) analysis to predict the leakage, drag power, and dynamic force coefficients of a circumferentially grooved seal supplied with air in oil mixture with a GVF varying from 0 to 0.7. The test seal has fourteen grooves, an overall axial length of 43.6 mm and a radial clearance of 0.211 mm. The 127 mm diameter rotor spins at constant angular speed (Ω=3,500 rpm). The mixture enters the seal at a supply pressure (Pin) of 2.9 bar(a), and the seal exit pressure (Pout) is 1 bar(a). The CFD two-phase flow simulations utilize the Euler-Euler multiphase model to predict the mass flow rate and the pressure field as a function of the operating conditions. Using a multi-frequency shaft orbit motion method, the CFD simulations deliver the variations of reaction force on the rotor with respect to the excitation frequency. &nbsp;For a pure liquid condition (GVF=0), both the CFD and experimental results produce constant stiffness, damping and added mass coefficients. The experimental and CFD results indicate that the rotordynamic force coefficients are quite sensitive to the gas volume fraction (GVF). When introducing a small amount of air into the oil (GVF=0.1), the added mass coefficient decreases by up to 21%, and the direct damping coefficient increases by approximately 10%. For operation with a mixture with inlet GVF &gt; 0.1, the cross-coupled stiffness coefficients develop strong frequency dependent characteristics. In contrast, the direct damping coefficient has a negligible variation with the excitation frequency. The CFD predictions, as well as the experimental results, demonstrate that a small amount of air in the liquid can significantly change the seal rotordynamic characteristics, and thus can affect the rotordynamic stability of a pump. An accurate CFD analysis thus enables engineers to design reliable grooved seals operating under two-phase flow conditions.

Cfd Analysis of the Influence of Gas Content on the Rotordynamic Force Coefficients for a Circumferentially Grooved Annular Seal for Multiple Phase Pumps

Paper Proceedings: https://asmedigitalcollection.asme.org/GT/GT2021/volume/84898

Turbo Expo 2021

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.