Operation of tilting pad journal bearings (TPJBs) with a reduced flow decreases pumping costs and oil sump storage. A low supplied oil flow improves system energy efficiency by reducing drag power losses albeit the temperature rise in both the bearing pads and the lubricating oil become a concern. This paper presents measurements of the static and dynamic load performance of a flooded ends TPJB lubricated with an ISO VG 46 oil, supplied at 60 oC, and with flowrate ranging from 150% to just ~5% of a nominal supply condition. The flow changes cover both the over-flooded and starved flow conditions. The test bearing is a four-pad, 102 mm in diameter, center pivot, with single orifice feeds, and configured with end seals to flood the bearing housing. The experiments include operation at two shaft speeds = 6 krpm and 12 krpm (= 64 m/s surface speed) and under three applied specific loads = 0.345 MPa, 1.03 MPa and 2.07 MPa (LBP). The measurements show the bearing drag power loss decreases by nearly 20% when the flow rate drops to 50% of nominal. However, halving the flow produces a raise in pad subsurface temperatures, ~7°C increase for operation at 12 krpm. Flow reduction below 50% does result in even more substantial power savings; however, it also produces too hot pad temperatures that approach 130 oC, a known limit for Babbitt material safe operation. The bearing static eccentricity (e) and direct stiffnesses KXX &lt; KYY (load direction) do not show a significant dependency of the supplied flow rate, either above or below the nominal condition. Some minor stiffness hardening does occur for very low flow conditions, 5% or so of nominal.&nbsp; Damping coefficients (CXX ~ CYY) decrease by ~30% as the flow rate decreases from 150% to just a few % of nominal flow. The experimental results are first to quantify operation of a TPJB supplied with minute amounts of lubricant flow. A test with a very low flow rate at ~ 2% of nominal and under a light load produced the emergence of a broadband subsynchronous vibration frequency, albeit with very small amplitude.

Measurements to Quantify the Effect of a Reduced Flow Rate on the Performance of a Tilting Pad Journal Bearing (Lbp) With Flooded Ends

Paper Proceedings: https://asmedigitalcollection.asme.org/GT/GT2021/volume/84898

Turbo Expo 2021

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.