<p>Gas turbine combustion chambers contain numerous small-scale features that help to dampen acoustic waves and alter the acoustic mode shapes. This damping helps to alleviate problems such as thermoacoustic instabilities. During computational fluid dynamics simulations (CFD) of combustion chambers, these small-scale features are often neglected as the corresponding increase in the mesh cell count augments significantly the cost of simulation while the small physical size of these cells can present problems for the stability of the solver. In problems where acoustics are prevalent and critical to the validity of the simulation, the neglected small-scale features and the associated reduction in overall acoustic damping can cause problems with spurious, non-physical noise and prevents accurate simulation of transients and limit cycle oscillations. Low-order dynamical systems (LODS) and artificial neural networks (ANNs) are proposed and tested in their ability to represent a simple two-dimensional acoustically forced simulation of an orifice at multiple frequencies. These models were built using compressible CFD, using OpenFOAM, of an orifice placed between two ducts. Acoustic waves were&nbsp;imposed from the downstream boundary using characteristic boundary conditions and the temporal evolution the flow through the orifice recorded at the orifice plane while pressure is recorded by point probes upstream and downstream of the orifice. The acoustic impedance of the orifice has been computed using the multi-microphone method and compared to a commonly used analytical model. Following this, the entire flow field and flow through the orifice has been modelled using&nbsp;both a LODS and ANN model. Both methods have shown the ability to closely represent the simulated dynamical flows at much lower computational cost than the original CFD simulation. This work opens the possibility of models that can dynamically predict the flow through, for instance, acoustic liners, dilution ports and fuel injectors in real engines during thermoacoustic instabilities without having to mesh and simulate these small-scale features directly. Such models may also assist in the accurate simulation of flame quenching due to cooling flows or the design of effusion cooled aerodynamic surfaces such as nozzle guide vanes (NGVs) and turbine blades.</p>

Towards Reduced Order Models of Small-Scale Acoustically Significant Components in Gas Turbine Combustion Chambers

Paper Proceedings: https://asmedigitalcollection.asme.org/GT/GT2021/volume/84898

Turbo Expo 2021

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.