<p>The flexural strength of ice is not a basic material property, but rather is an estimate of the maximum stress in the outermost fiber of an ice specimen when it fails in bending. Such conditions correspond to a number of important ice engineering applications, such as interactions between ice and a sloping structure or between ice and ships. Ice flexural strength is therefore highly important for calculating ice pressures and forces of interest for engineering design. While there has been considerable discussion in the literature regarding scale effects related to ice crushing against a vertical structure, scale effects in relation to bending failure have received much less attention. To this end, more flexural strength data for large, full-thickness sea ice beams are needed. To address these data gaps, a field data collection program was carried out in Pistolet Bay, Newfoundland over two field seasons (2017-2018). During this program, large sea ice beams were tested in-situ using a custom four-point bending apparatus, which was comprised of several main subsystems (<i>e.g.</i>, the ram loading system, the platen, the u-brackets, and the hydraulic system). The sea ice beams were completely cut free from the ice cover and loaded at four points, such that the center load is parallel, but opposed to, the loads at the ends of the beam. All tests were done in-situ so that no brine drainage took place and the temperature gradient remained consistent. Tests were carried out for several combinations of beam geometry, which were scaled relative to the ice thickness. In addition to flexural strength, during the Pistolet Bay field program, the physical properties of the ice were measured (temperature, salinity, density). In this paper, a description of the field apparatus, test program and main results from the full-thickness in-situ four-point beam bending tests are presented, along with a discussion of practical implications and future work.</p>

Full-Scale In-Situ Four-Point Beam Bending Field Tests on Sea Ice

Paper Proceedings: https://asmedigitalcollection.asme.org/OMAE/OMAE2021/volume/85116

OMAE 2021

Supporting the need among researchers worldwide for additional online and multimedia content, ASME now offers the ASME Conference Video Collection. This platform will collect and provide long-term access to conference presentation videos, encompassing all technology areas within ASME's technical conference and events program. About 30,000-40,000 engineers across all mechanical engineering and related disciplines participate in ASME conferences each year. This includes authors of approximately 6,000 to 8,000 technical papers published by ASME, the majority of whom also submit video presentations for our virtual conferences. The video collection will be available as an add-on to existing product packages or as a separate subscription.