**Description**
Robotic arms are widely known to fall short in achieving the tolerances required when it comes to the metal machining industry, especially for the aerospace sector. Broadly speaking, two of the main reasons for that are a lack of stiffness and a lack of accuracy. Robotic arm manufacturers have responded to the lack of stiffness challenge by producing bigger robots, capable of holding high payloads (e.g. Fanuc M-2000iA/2300) or symmetric robots (e.g. ABB IRB6660). Previous research proved that depending on the application and the material being machined, lack of stiffness will still be an issue, even for structurally bigger robotic arms, due to their serial nature. The accuracy issue has been addressed to a certain extent by using secondary encoders on the robotic arm joints. The encoder enhanced robotic arm solutions tend to be expensive and prior knowledge proves that there are still limitations when it comes to achieved accuracy. The current work aims to provide a performance analysis of the path following capabilities of two robotic machining platforms, namely the Accurate Robotic Milling System (ARMS) and the MABI MAX-100/2.25. Both platforms are equipped with secondary encoders (optical and inductive, respectively) and Siemens 840 Dsl controllers and have been designed to be used in machining applications. The performance analysis will be demonstrated with a novel path that takes into consideration the BS EN ISO 9283:1998 standards for manipulating industrial robots while utilising machining specific feed rates and feasible working volumes for both platforms. Furthermore, an accuracy study is performed for the 840 Dsl controller Sinumerik Trace tool capabilities of the 840 Dsl controller and verified by using a Leica Absolute AT960 laser tracker to assess its reliability for usage in accuracy analysis. This would remove the need to use expensive external metrology equipment for tracking path accuracy.

**Author(s) - ranked in descending order of contribution / as it should appear when published**
Dr Oana-Daniela Sawyer



Path Following Performance Analysis for Siemens 840 Dsl Controlled Robotic Machining Platforms with Secondary Encoders

SAE International’s AeroTech is the premier global aerospace technology conference and exhibition focused on and celebrating innovation in virtually every facet of modern aerospace and defense mobility, including platform, system, subsystem, component, and material research and development, engineering, manufacturing, assembly, test and validation, certification, integration, deployment, sustainment, safety, security, and sustainability. Innovators and thought-leaders from the global aerospace community convene annually at AeroTech to share and learn about the latest advancements and achievements, advance technical knowledge and innovation, discuss challenges and practical solutions, discover new technologies and techniques, uncover trends and opportunities, network, and collaborate.